Installing MLILY iActive Bedhead

Bedhead installation iActive

The iActive (B200/B253) bedhead should come with the following:

8 x Long bolts with nuts
2 x Brackets 
4 x Short bolts 

  1. Additionally, you will need a socket and wrench (or similar) for assembly.
  1. Start by attaching the brackets to the bedhead using the short bolts. Have the open side of the brackets facing inwards.

  2. Move the headboard into place at the head and using the longer bolts and nut secure 4 bolts per-side to secure the bedhead to the base. Use appropriate tools to tighten.

    • Related Articles

    • iActive (20M, 30M and 40M) Remote Synchronization & Desynchronization Instruction

      For iActive Adjustable Base Models with Massager (20M, 30M and 40M) follow the below instruction Step 1: Place Remote A on Adjustable Base A (Left), place Remote B on Adjustable Base B (Right) Step 2: Pick up the Remote A, change the position of the ...
    • iForm Motion Bed MA-Series Owner Manual (Installation and Operation Guide)

      OWNER MANUAL Installation & Operation iForm MA-1000/MA-2000(S)(M)/MA-3000M/MA-4000M READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical ...
    • Mobile Application iActive

      How to install BlueTooth Application instructions: 1. Search and download MLILY Control in the app store (Fig 1). 2. Open application 3. Accept push notifications for BlueTooth, Camera & similar. 4. Select device (Fig 3). If your device is not ...
    • iForm How to use one remote control to work on two motion beds (MA-Series)

      1. Review your operation manual on how to pair the remote controls with the motion bed: click below link. https://support.mlily.com.au/portal/en/kb/articles/how-to-pair-the-remote-controls 2. Use ONE remote control to pair with ONE motion bed; 3. Use ...
    • Cable Restraint Cover

      It is important to remove the cable restraint cover before plugging the cables in to the control box. Failing to remove the Cable Restraint Cover from the control box may cause damage or inadequate connection of cables. The improper connection ...