How to pair the remote controls iForm (MA Series)?
For ONE motor motion bed products (e.g. MA1 and 1000):
1. Press and hold the "Head Up" and "Head Down" buttons together;
2. Press the RESET button on the power cord (connected to the control box);
3. If you hear a beep sound, the synchronization has been successfully completed. Check the remote control to test how it works.
For other models (with MORE THAN ONE motors, e.g. MA2, MA2S, MA3SM, MA4SM, 2000, 2000S, 2200S, 3200S, etc.) please follow these instructions:
1. Press and hold the "Head Up" and "Foot Up" button together;
2. Then press the RESET button on the power cord (which connected to the control box);
3. If you hear a beep sound, the synchronization has been successfully completed. Check the remote control to test how it works.
Related Articles
iForm Motion Bed MA-Series Owner Manual (Installation and Operation Guide)
OWNER MANUAL Installation & Operation iForm MA-1000/MA-2000(S)(M)/MA-3000M/MA-4000M READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical ...iForm How to use one remote control to work on two motion beds (MA-Series)
1. Review your operation manual on how to pair the remote controls with the motion bed: click below link. https://support.mlily.com.au/portal/en/kb/articles/how-to-pair-the-remote-controls 2. Use ONE remote control to pair with ONE motion bed; 3. Use ...iFit 2200F Adjustable Base Remote Connection Diagnosis Instruction
Before doing anything, check if there is a Reset/Paring button on the power cord. The below image shows what it looks like. 1. For the 2200F without reset button on the power cord: Step 1 - Please check batteries are working and correctly inserted ...iFit Adjustable Beds remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...MLILY Adjustable Bed remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...