How to reprogram the Anti-Snore button if it's not working?
To reset/reprogram the Anti-Snore button, you will need to follow the instructions:
Step 1. Put your adjustable base in the flat position by pressing the FLAT button.
Step 2. Manually set your adjustable base to the Anti-Snore position by using the HEAD UP button to raise the head end approximately 12cm off of the base.
Step 3. Press and hold both the FLAT button and the Anti-Snore button until you hear a beep sound coming from the adjustable base. This indicates that you have successfully reprogrammed the Anti-Snore button.
Related Articles
How to reprogram the Zero Gravity button if it's not working?
To reset/reprogram the Zero Gravity button, you will need to follow these instructions: Step 1. Put your adjustable base in the flat position by pressing the FLAT button. Step 2. Manually adjust the base by using the HEAD UP button to raise the head ...
iFit 2200F Adjustable Base Remote Connection Diagnosis Instruction
Before doing anything, check if there is a Reset/Paring button on the power cord. The below image shows what it looks like. 1. For the 2200F without reset button on the power cord: Step 1 - Please check batteries are working and correctly inserted ...
iForm Motion Bed MA-Series Owner Manual (Installation and Operation Guide)
OWNER MANUAL Installation & Operation iForm MA-1000/MA-2000(S)(M)/MA-3000M/MA-4000M READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical ...
iFit Adjustable Beds remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...
MLILY Adjustable Bed remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...