For ONE motor motion bed products (e.g. MA1 and 1000): 1. Press and hold the "Head Up" and "Head Down" buttons together; 2. Press the RESET button on the power cord (connected to the control box); 3. If you hear a beep sound, the synchronization has ...
Before doing anything, check if there is a Reset/Paring button on the power cord. The below image shows what it looks like. 1. For the 2200F without reset button on the power cord: Step 1 - Please check batteries are working and correctly inserted ...
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...
Please note, only doing this when failed to disconnect 2 bases synchronization after tried the below instruction https://support.mlily.com.au/portal/en/kb/articles/iactive-remote-synchronization-desynchronization-instruction Step 1: Remove one ...