Mobile Application iActive

How to install BlueTooth Application instructions:

1. Search and download MLILY Control in the app store (Fig 1).

2. Open application

3. Accept push notifications for BlueTooth, Camera & similar.

4. Select device (Fig 3). If your device is not showing please select refresh at the bottom of the page.

Alternatively, on selection of device scan the QR code found inside the back cover of the remote control using the scan icon (second from left) to establish the connection.

5. Following a successful pairing, you should now be able to control the base via the application interface (Fig 5).

• Related Articles

• Bedhead installation iActive

  The iActive (B200/B253) bedhead should come with the following: 8 x Long bolts with nuts 2 x Brackets 4 x Short bolts Additionally, you will need a socket and wrench (or similar) for assembly. Start by attaching the brackets to the bedhead using the ...

• iActive (20M, 30M and 40M) Remote Synchronization & Desynchronization Instruction

  For iActive Adjustable Base Models with Massager (20M, 30M and 40M) follow the below instruction Step 1: Place Remote A on Adjustable Base A (Left), place Remote B on Adjustable Base B (Right) Step 2: Pick up the Remote A, change the position of the ...

• Change remote ID (re-program handset) to disconnect synchronization between 2 bases

  Please note, only doing this when failed to disconnect 2 bases synchronization after tried the below instruction https://support.mlily.com.au/portal/en/kb/articles/iactive-remote-synchronization-desynchronization-instruction Step 1: Remove one ...