iFit Adjustable Beds remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected.
Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and try again. If it is still not illuminating, report the remote control issue to the store of purchase to see if the remote is covered under warranty or alternatively to purchase a new remote control.
Step 3 - Disconnect power from wall socket.
Step 4 - Reconnect the power.
Step 5 - Check the LED lights on both the Adapter and Control Box (underneath the base, located in the center of the base) are illuminating.
Step 6 - Press the Head up and Foot up buttons simultaneously and wait for 1 second (don't release your fingers on the remote), then pressing the Reset/Paring Button (reset button is on the power cord). If you hear a beep sound which indicates the remote has been paired to the base. After hearing the beep sound, now you may remove your fingers from the buttons on the remote control and the reset button on power cord.
Step 7 - If no beep sound being generated, report to the store to raise a warranty claim to see if we should replace the control box or purchase a new control box.
Note, the step 5, don't push the three buttons together at the same time, but the Head Up and Foot Up being pushed together and held first, then pressing the Reset button.
If your model is iFit 2200F please direct to the below link:
Related Articles
MLILY Adjustable Bed remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...iFit 2200F Adjustable Base Remote Connection Diagnosis Instruction
Before doing anything, check if there is a Reset/Paring button on the power cord. The below image shows what it looks like. 1. For the 2200F without reset button on the power cord: Step 1 - Please check batteries are working and correctly inserted ...How long is MLILY product warranty?
Warranty terms may vary based on specific product but broadly, unless otherwise stated: Mattresses: 10-year warranty Adjustable Bases: 10-year warranty (metal Frame/motor) Mattress Toppers: 5 Years Pillows: 5 Years Remote/electrical: 2 Years For ...Cable Restraint Cover
It is important to remove the cable restraint cover before plugging the cables in to the control box. Failing to remove the Cable Restraint Cover from the control box may cause damage or inadequate connection of cables. The improper connection ...iForm How to use one remote control to work on two motion beds (MA-Series)
1. Review your operation manual on how to pair the remote controls with the motion bed: click below link. https://support.mlily.com.au/portal/en/kb/articles/how-to-pair-the-remote-controls 2. Use ONE remote control to pair with ONE motion bed; 3. Use ...