iForm How to use one remote control to work on two motion beds (MA-Series)
1. Review your operation manual on how to pair the remote controls with the motion bed: click below link.
2. Use ONE remote control to pair with ONE motion bed;
3. Use the SAME remote control to pair for ANOTHER(second) motion bed.
For more information, please check the below link:
Related Articles
iForm Motion Bed MA-Series Owner Manual (Installation and Operation Guide)
OWNER MANUAL Installation & Operation iForm MA-1000/MA-2000(S)(M)/MA-3000M/MA-4000M READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical ...How to pair the remote controls iForm (MA Series)?
For ONE motor motion bed products (e.g. MA1 and 1000): 1. Press and hold the "Head Up" and "Head Down" buttons together; 2. Press the RESET button on the power cord (connected to the control box); 3. If you hear a beep sound, the synchronization has ...iFit Adjustable Beds remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...MLILY Adjustable Bed remote control diagnosis instructions/troubleshooting
Step 1 - Please check the LED on the power adapter is Green. If not, check the cable connections and power is connected. Step 2 - Check remote control to see if the buttons are illuminating. If yes, move to step 3. If no, try changing the battery and ...Change remote ID (re-program handset) to disconnect synchronization between 2 bases
Please note, only doing this when failed to disconnect 2 bases synchronization after tried the below instruction https://support.mlily.com.au/portal/en/kb/articles/iactive-remote-synchronization-desynchronization-instruction Step 1: Remove one ...